How To Change a Car Tyre - A Step-By-Step Guide?

There's no getting around it: even the best tyres for the car will wear out and, sooner or later, you're going to have to change one. Thankfully, changing a tyre is a manageable job for most vehicle owners who can spare an hour or two when the need arises. So, before you call your tow guy or get stuck waiting on the side of the road for a stranger to change it for you, let's run through this step-by-step guide on how to change a car tyre with a spare so that you can get back on the road again in no time.

How To Change A Car Tyre?

Car tyres are the most important parts of your car. Without them, it would not be possible to move the vehicle at all. Therefore, you need to be able to change a car tyre when something goes wrong or they wear out and need replacing.

Many people may feel that changing a car tyre is hard because they do not know how to do it. However, this is not true since changing a car tyre is quite easy once you learn how to do it properly.

Things You’ll Need To Change A Car Tyre

You'll need to get a few things ready before you can change your tyre. You should have these tools in your car at all times in case of emergencies:

• A jack that fits under the car
• Wheel wedges (if not already included with your car jack)
• A lug wrench for removing nuts on the wheels of your vehicle
• Wooden blocks or bricks to hold up the tyre while it's being removed

Steps To Change A Car Tyre

When a tyre is punctured or damaged in any way, it must be replaced as soon as possible. Car tyres can be extremely dangerous to use if they are not checked regularly. Below are some steps to change your car's tyre:

1. Engage The Hand Brake

If you’re in the middle of a highway, on an incline or decline, or an uneven surface (e.g., gravel), don’t try to change a tyre. Find a safe place to park first. Park in a safe place on level ground and engage both hand brake and parking brake before getting out of the car.

2. Secure The Wheel Wedges

The wheel wedges are used to secure the wheel in place and prevent movement during the tyre change process. To wedge a wheel, you'll need a wooden board approximately 1' long by 3" wide (30cm x 7cm), or any other suitable material that's sturdy enough not to bend or break under pressure.

3. Remove The Wheel Covers

Remove the wheel covers on your car. The wheel covers are located on either side of your wheels and can be easily removed with a screwdriver. If you’re not sure how to remove them, ask a professional mechanic for help.

4. Remove The Lug Nuts

Now that you have loosened the lug nuts halfway, it is time to use a socket wrench and socket to turn them counterclockwise. This should not be done with bare hands as they could get caught between the tyre and wheel rim.

Instead, you can use a wheel wrench, which has an extended handle that makes turning lug nuts easy without putting your hand at risk of injury. Use this tool by inserting it over the lug nut and turning counterclockwise until they are halfway loose.

5. Secure The Jack with Wooden Boards

When you put the jack under your car, you will have to make sure that it doesn't slip or fall over. You can do this by placing two wooden boards underneath the jack, holding it in place, and making sure that nothing is going to slide.

6. Replace The Flat Tyre

Replace the flat tyre with your spare tyre, which should have been placed on the floor of your car before you drove off. Once you've replaced this tyre, tighten all four lug nuts with a torque wrench (or an adjustable spanner) until they are tight enough to keep it in place.

Bottom Line

While the lifespan of a tyre largely depends on its design, climate, road conditions, and driver habits, customers in India expect their tubeless tyres life to run for about 50,000 km before having to replace them. If you follow our instructions, you should be able to remove an old tyre and replace it with a new one with no problem. You can easily get your tyres replaced from Apollo Tyres Shop.